Hospital Medical Equipment Parts Mindray BeneVew T1 Patient Monitor Display Main Board 051-000731-02
Mindray BeneVew T1 Patient Monitor Display Main Board 051-000731-02
► Brief Introduction
The BeneView T1 is intended to be used for monitoring, displaying, reviewing, storing and transferring of multiple physiological parameters including ECG, respiration (Resp), temperature (Temp), SpO2, pulse rate (PR), non-invasive blood pressure (NIBP), invasive blood pressure (IBP), cardiac output (C.O./PiCCO), and carbon dioxide (CO2) of single patient.
The main board is the core of control over the entire system. It also implements DC/DC conversion and power management. The main functions of the main board are:
1. Implementing display drive, audio drive, Wi-Fi drive, and touch screen drive;
2. Implementing network communication, data storage, serial port extension, button scanning, and DC/DC conversion;
3. Controlling power on/off, alarm indicating lamp, backlight, and fan;
4. Managing multi-parameter subsystem, smart battery, external parameter modules;
5. Detecting whether the battery is on position;
6. Exchanging data with the infrared communication backboard;,
7. Controlling the power supply to peripheral devices, such as screen backlight, digital drive of the screen, and Wi-Fi; turning off these devices individually or switching them into low power consumption mode.
► Specification
| Input voltage | 12 VDC (±10%) |
| Input current | 2 A |
| Voltage Rating | 100 to 240 VAC (±10%), 50/60 Hz (±3 Hz) |
| Defib Sync Pulse Output impedance | ≤ 100 Ω |
| Defib Sync Pulse Pulse width | 100 ms ±10% |
► Disassembling
1. Unscrew the four PT3×10 screws that fixes the front housing assembly and remove the front housing assembly from the main frame. Make sure to disconnect the connectors for Wi-Fi antenna and analog output cable, see the figure below.
2. Loose the latch fixing the Wi-Fi module PCBA to remove the Wi-Fi module PCBA from the main board.
3. Tear the adhesive tape, and then press the SD card to remove it from the main board.
4. Loose the socket buckle, and then detach the LCD cable from the main board connector. Remove the main board from the front housing assembly main frame, as shown in the figure below.
► Warranty Policy
Under normal circumstances, our new or old items usually have a three-month warranty. In other words, if you find any problems with the product you purchased, you can replace or repair the machine during the warranty period. But please take your time. We hope that you will be satisfied with our products and services and be down-to-earth. Moreover, we are confident that you can be satisfied, because our products are of high quality. Years of sales experience enables us to deal with such problems proficiently. Customer satisfaction is the goal we have been pursuing.
Thank you for your time! If you are interested in Mindray BeneVew T1 Patient Monitor Display Main Board 051-000731-02, welcome to place your orders. Early order early shipment! If you have any questions, please feel free to contact us at any time, we are glad to answer them.
Product Tags:
|
|
Mindray BeneVew T1 Patient Monitor Display Main Board 051-000731-02 Hospital Medical Equipment Parts Images
|
