MX-5 Masima Rainbow SET SpO2 Pulse Oximeter Circuit Board Spare Parts
Board Dimensions
| Board Dimensions | Typical |
| Width | 2.0 inch |
| Length | 2.5inch |
| Thickness | 0.062 inch |
| Top Height | 0.2inch |
| Bottom Height | 0.1inch |
| Mounting Hole | 0.125inch |
Connector Data
| Connector Description | Power and communications connector | Sensor connector |
| Number of Pins | 10 | 20 |
| Configuration | 2 rows of 5 | 2 rows of 10 |
| Angle | Vertical | Vertical |
| Pin Grid | 0.050 inch | 0.050 inch |
| Manufacture Part# | Samtec SFM-105-02-S-D-A | Samtec SFML-110-T2-S-D-A |
DC power requirments
| | Typical | Maximum |
| Input Voltage | +5v | +0.25v |
| Line/Load Regulation | | 1.0% rms |
| AVG.Power (Rainbow SET) | 350 mW | 500W |
| AVG.Power(Masima set) | <150mW | |
Serial Interface
| | Default | Maximum |
| Baud Rate(Configurable) | 9600 bps | 115200bps |
Size :
Dimensions: 2 inches x 2.5 inches
Board thickness: 0.062 inches
Mounting hole diameter: 0.125 in
Masima's revolutionary non-invasive surveillance technology can be integrated into a range of multi-parameter and multi-function surveillance devices through our MX and MSX series circuits.
When used with Masima Rainbow® Multi-Wavelength LED Sensors, the MX-Series Board can provide a full set of Masima Rainbow® measurements, including total hemoglobin (SPHiliphhilipb®), oxygen content (SpOC ™), carboxyhemoglobin (SpCO®), Methemoglobin (SpMet) ®) and acoustic respiratory rate (RRa®) and Masima SET® Low Perfusion Motion and Low Perfusion ™ pulse oximetry measurement of SpO2, heart rate, perfusion rate and plethysmograPHiliphhilipic variability index (PVi®).
About Masima MX-5 board
The Masima MX-5 OEM circuit board is a technology platform that utilizes approximately half the power of previously available Rainbow® circuit board and provides a groundbreaking Rainbow® non-invasive pulse oximetry measurement. The MX-5 is also unique in that it can still dynamically adjust power consumption according to the type of parameter being measured.
Original equipment manufacturers (OEMs) use Masima circuit board to perform non-invasive Masima SET® Measure-Through Motion and Low Perfusion ™ pulse oximetry measurements and Rainbow® Pulse CO oximetry measurements on their own medical equipment and patient monitors. To achieve the high-performance, non-invasive measurement function of Rainbow® Pulse CO Oximetry, an average of 550 millivatts of power is required to date. The new MX-5 plate has a lower power consumption of 250-320 millivat on average, depending on the measured rainbow parameters. Reducing power consumption by about 50% is expected to facilitate integration with next-generation patient monitoring solutions, which require more efficient power management solutions to enable smaller, lighter and more mobile battery-powered devices.
Compared to the previous Rainbow® card, the MX-5 not only increases lower power consumption but also dynamic power consumption, allowing the MX-5 to adjust power consumption to a controlled combination of parameters, giving longer battery life. For example, if only Masima SET® SpO2 and heart rate are monitored, the average power consumption of the MX-5 will be reduced by more than 75% compared to the previous Rainbow® card. The Masima MX-5 has the same dimensions as its predecessor, the MX-3, 2 "x 2.5", and allows for a simple expansion replacement.
The Masima MX-5 OEM board uses only 50% of previous power requirements without affecting performance. It offers all the features of groundbreaking Rainbow® technology to control total hemoglobin (SPHiliphhilipb®), oxygen concentration (SpOC ™), carboxyhemoglobin (SpCO®) in non-invasive measurements, methemoglobin (SpMet®) and acoustic respiration rate (RRa ®). In addition, the Masima SET® pulse oximeter offers the "Measurement with training and hypoperfusion oxygen saturation (SpO2)" measurement function, heart rate and perfusion index (PI).
Rick Fishel, CEO of Masima Global OEM Business and Corporate Development, said: "The powerful MX-5 board represents Masima's commitment to continuous technological improvement, including integrating OEM's innovative, non-invasive Rainbow measurement into smaller, more portable ones. and development enhanced "Ability to monitor devices for a variety of existing and new healthcare applications. Circulatory innovations such as the MX-5 provide non-invasive rainbow pulse oximetry measurement features that enable PHiliphhilipysicians to obtain up-to-date information on patients' PHiliphhilipysiological status, which may lead to better outcomes. "
Product Tags:
|
|
Rainbow SET SpO2 Pulse Oximeter Circuit Board Spare Parts MX-5 Masima Images
|
